PACIFIC ELECTRONICS - DISTRIBUTOR "KYORITSU ELECT.MEASURING INSTRUMENTS"

✔ KEW3431 can measure insulation resistance and also AC / DC voltage on low-voltage installations of 600V or less.

✔ Designed to international safety standards: IEC61010-1, IEC61010-2-030 CAT III 600V Pollution degree 2, IEC61010-31

✔ Compact and lightweight design

✔ Scale light and LED spot light to facilitate working at dimly illuminated locations or at night time work, Built-in illuminance sensor automatically turns ON/OFF the lights. Auto-light-off function is also available to turn off these lights automatically if the location switch is not moved or the test button is not pressed for two minutes. The auto-lighting function can be turned off.

✔ Test probe with remote control switch is supplied as standard accessory

✔ Shoulder strap for both-hands operation.

✔ User-changeable test prods

✔ Live circuit warning with blinking LED and buzzer.

✔ Voltage measurement : * AC/DC auto detection * Live circuit warning for a voltage input of 30V or higher

Insulation resistance measurement

✔ With auto-discharge function : when an insulation resistance like a capacitive load is measured, electric charges stored in capacitive circuits are automatically discharged after measurement. Discharge can be checked with the warning LED and buzzer.

✔ With alarm function : The LED indicates whether a measured value is less than or higher than the reference value. This function can be turned off.

✔ Safety range between 500V and 1000V ranges.

✔ Discontinuous warning buzzer sounds when the function switch is set to 1000V range.