PACIFIC ELECTRONICS - DISTRIBUTOR "KYORITSU ELECT.MEASURING INSTRUMENTS"

DC V

600.0mV/6.000/60.00/600.0/600V (Input Impedance: 10MΩ, 100MΩ only 600mV)
±0.5%±2dgt (600.0mV/6.000/60.00/600.0V)
±0.8%±3dgt (600V)

AC V

6.000/60.00/600.0/600V (Input Impedance: 10MΩ)
±1.0%±3dgt (6.000/60.00/600.0V)
±1.5%±3dgt (600V)

DC A

600/6000µA/60/600mA/6/10A
±1.2%±3dgt (600/6000µA/60/600mA)
±2.0%±5dgt (6/10A)

AC A

600/6000µA/60/600mA/6/10A
±1.5%±4dgt (600/6000µA/60/600mA)
±2.2%±5dgt (6/10A)

Ω

600Ω/6/60/600kΩ/6/60MΩ
±1.0%±2dgt (600Ω/6/60/600kΩ/6MΩ)
±2.0%±3dgt (60MΩ)

Continuity buzzer

0 - 600Ω (Buzzer sounds below 100Ω)

Diode test

2.8V open circuit voltage: Approx. 0.4mA Test Current

Capacitance

40/400nF/4/40/400/4000µF

Frequency

10/100/1000Hz/10/100/1000kHz/10MHz

DUTY

0.1 - 99.9% (Pulse width/Pulse period)
±2.0%±2dgt (- 10kHz)

Temperature

-50 - 300ºC (-58 - 572ºF)
(with the use of Temperature probe 8216)
Note: KEW 1011 can measure max. 700ºC In order to measure over 300ºC, please use a K-type temperature probe available in the market.

Applicable standards

IEC 61010-1 CAT III 300V / IEC 61010-1 CAT II 600V Pollution degree 2
IEC 61010-031 IEC 61326

Display

6040 Counts

Power source

R6 (1.5V) × 2 (Auto-power-OFF within 15 minutes)

Dimension

161(L) × 82(W) × 50(D)mm

Weight

Approx. 280g

Accessories

7066A (Test leads)
8216 (K-type Temperature probe)
8918 (Ceramic fuse [0.8A/600V]) × 1 (included)
8919 (Ceramic fuse [10A/600V]) × 1 (included)
R6 × 2
Instruction Manual

Optional accessories

7234 (Crocodile clip test lead)
9095 (Carrying case)