PACIFIC ELECTRONICS - DEALER "SANWA ELECT.MEASURING INSTRUMENTS"

Description
The Sanwa DM1009S is an Analog DC Insulation tester with an accuracy of ±5% of full scale.
The Sanwa DM1009S a DC insulation resistance tester to measure the insulation resistance of electric lines and equipment. The measured voltage is maintained until the low insulation resistance value at the rated current specifi­ed in IEC61557-2. This instrument is CAT. III 600V certified.

The DM1009S is equipped with the discharge function to discharge a test circuit once the user is done testing it. The device can measure up to 2000MΩ of insulation resistance when a test voltage of 1000 volts is applied. This instrument can also measure voltages of up to 60V DC and 600V AC with an accuracy of ±5% of full scale.

Includes meter, test leads, carrying case with strap and instruction manual.

Test voltage DC1000V
One-shot or continuous measurement push switch
DCV measurement range (DC60V)
Auto discharge function
Inner battery check range
ACV measurement range
Lightweight Design
Specifications
Scale(MΩ)    1～2～1000～2000MΩ
     Tolerance    ± 5% of reading（1st effective measurement range: written in the thick print above）
±10% of reading（2nd effective measurement range: written in small type above)
ACV    600V
     Tolerance    Within ±5% of the max. scale value(50～60Hz sine wave)
DCV    60V
     Tolerance    Within ±5% of the max. scale value
Rated current    1.0～1.2mA
Battery    6LF22/6LR61 (9V alkaline battery) x1
Size/Mass    H144×W99×D43mm / Approx. 310g
Safety standard    IEC61010 CAT.Ⅲ 600V